Knowledge Management System of Hefei Institute of Physical Science,CAS
基于ISPRA-Fe实验的SuperMC 3.2屏蔽深穿透验证 | |
其他题名 | Validation of Super MC 3.2 for Deep Penetration Problems with ISPRA-Fe Experiment |
2019 | |
发表期刊 | 核科学与工程
![]() |
ISSN | 0258-0918 |
摘要 | 为验证中子输运设计与安全评价软件系统SuperMC(超级蒙卡)在计算裂变堆屏蔽深穿透问题时的准确性和可靠性,采用OECD/NEA和RSICC联合发布的国际屏蔽积分实验数据库(SINBAD)中的ISPRA-Fe基准例题进行了测试验证。通过对屏蔽分析中关注的中子通量密度和反应率的计算,SuperMC所有物理量的计算结果与MCNP参考值的相对偏差均小于3σ,且与实验结果整体上吻合较好。同时,针对厚屏蔽区域的32S(n,p)32P反应率计算难以收敛的问题,采用了全局权窗生成器GWWG生成权窗进行计算,FOM因子提高了4431倍,证明了SuperMC处理深穿透问题的正确性和高效性。 |
其他摘要 | Deep penetration problem in fission reactors proposes big challenge for neutron transport simulation.To validate the accuracy and reliability of SuperMC in solving such problem,ISPRA-Fe experiment from the shielding integral benchmark archive and database(SINBAD)released by OECD/NEA and Radiation Safety Information Computational Center(RSICC)was calculated.The neutron flux and reaction rates,which are of interest in shielding analysis,were calculated and analyzed in this paper.The results showed a good agreement between SuperMC and the experimental values,and that the relative deviations between the results of SuperMC and MCNP are in the±3σinterval.In addition,aimed at the slow convergence problem in reaction rate calculation of 32 S(n,p)32 P,the global weight window generator(GWWG)was used in SuperMC.FOM can be accelerated by a factor of 4 431.The correctness and effectiveness of the shielding design and analysis of SuperMC in deep penetration problem is proved. |
关键词 | SuperMC 深穿透 屏蔽计算 SINBAD |
收录类别 | CSCD |
语种 | 中文 |
CSCD记录号 | CSCD:6596850 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.hfcas.ac.cn:8080/handle/334002/48954 |
专题 | 中国科学院合肥物质科学研究院 |
推荐引用方式 GB/T 7714 | . 基于ISPRA-Fe实验的SuperMC 3.2屏蔽深穿透验证[J]. 核科学与工程,2019,039. |
APA | (2019).基于ISPRA-Fe实验的SuperMC 3.2屏蔽深穿透验证.核科学与工程,039. |
MLA | "基于ISPRA-Fe实验的SuperMC 3.2屏蔽深穿透验证".核科学与工程 039(2019). |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
百度学术 |
百度学术中相似的文章 |
必应学术 |
必应学术中相似的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论