Knowledge Management System of Hefei Institute of Physical Science,CAS
静态铅铋中Pt/Air型氧传感器性能初步研究 | |
其他题名 | Study on Stability and Veracity of Pt/Air Sensor in Liquid Lead-bismuth |
2015 | |
发表期刊 | 核科学与工程 |
ISSN | 0258-0918 |
摘要 | 液态铅铋合金氧测控作为加速器驱动次临界系统(ADS)的关键技术之一,对抑制结构材料腐蚀具有重要作用。为深入开展氧测控技术研究,自主研制液态铅铋氧测量及控制实验装置,并基于该装置开展Pt/Air型氧传感器在饱和氧浓度下的稳定性与精确性测试实验。结果显示,在625~786K温度范围内,Pt/Air型氧传感器电压信号经过传热产生的弛豫(〈750s)之后稳定性表现良好,测量值的最大绝对偏差为10mV,最大相对偏差为1.5%,与理论值符合较好,其偏差主要来自热电压及氧化物的影响。 |
其他摘要 | Measurement and control of oxygen content in liquid lead-bismuth is one of the key technologies in accelerator-driven subcritical system (ADS). It plays a vital role to resist structural material corrosion. Liquid lead-bismuth oxygen measurement and control experimental device was designed and constructed independently to study the key technology. Pt/Air reference electrode oxygen sensors were tested for the stability and veracity in the saturated oxygen concentration with the device. The results showed that in the temperature ranging from 625 ~ 786 K, it performed good stability after relaxation time less than 750 s for thermal equilibrium relaxation affect by the low heat conduction of YSZ ceramic tube. The voltage signal of Pt/Air sensor was in good agreement with the theoretical value, with absolute deviation less than 10 mV and relative deviation less than 1.5~. Reason for deviation came from thermoelectric voltages and oxide impurities. |
关键词 | 加速器驱动次临界系统 液态铅铋合金 氧测控 氧传感器 稳定性 精确性 |
收录类别 | CSCD |
语种 | 中文 |
CSCD记录号 | CSCD:5402866 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.hfcas.ac.cn:8080/handle/334002/69644 |
专题 | 中国科学院合肥物质科学研究院 |
推荐引用方式 GB/T 7714 | . 静态铅铋中Pt/Air型氧传感器性能初步研究[J]. 核科学与工程,2015,035. |
APA | (2015).静态铅铋中Pt/Air型氧传感器性能初步研究.核科学与工程,035. |
MLA | "静态铅铋中Pt/Air型氧传感器性能初步研究".核科学与工程 035(2015). |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
百度学术 |
百度学术中相似的文章 |
必应学术 |
必应学术中相似的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论