结合自动聚焦系统的共线双脉冲激光诱导击穿光谱信号稳定性研究

HFCAS OpenIR

	结合自动聚焦系统的共线双脉冲激光诱导击穿光谱信号稳定性研究
其他题名	Signal Stability of Collinear Double Pulse Laser Induced Breakdown Spectroscopy Combining with Auto-Focusing System
	2018-01-01
发表期刊	中国激光
ISSN	0258-7025
摘要	将基于图像清晰度评价函数的自动聚焦算法应用于共线双脉冲激光诱导击穿光谱（DP-LIBS）,基于Lab VIEW编写的控制软件对共线DP-LIBS实验系统与CCD相机、三维移动平台进行有效控制,将图像清晰度评价、自动聚焦算法和三维移动平台相结合,实现了样品的自动聚焦功能。实验结果表明：两激光脉冲间隔的最优位置为0.55μs;原子谱线的稳定性高于离子谱线;采用自动聚焦系统后,光谱强度的相对标准偏差（RSD）从16.7%降低到6.7%,钢样中Cr元素和Mn元素定量分析的相关系数分别从0.851和0.639提高到0.947和0.923。自动聚焦系统能够提高信号的稳定性和测量精度。
其他摘要	In this paper,we apply the auto-focusing algorithm,which is based on the image sharpness evaluation function,to collinear double pulse laser-induced breakdown spectroscopy（ DP-LIBS）. Through the control software based on Lab VIEW,the collinear DP-LIBS experiment system,CCD camera and three-dimensional mobile platform are effectively controlled. Image sharpness evaluation, the auto-focusing algorithm, and the three-dimensional mobile platform are combined to achieve sample auto-focusing function. The results show that the optimal interval between the two lasers is 0.55 μs. The stability of the atomic spectral line is higher than that of the ion line. The relative standard deviation of the spectral strength decreases from 16. 7% to 6. 7%. The quantitative analysis of the steel samples shows that the correlation coefficients of Cr and Mn measurements increase from 0. 851 and 0. 639 to 0. 947 and 0. 923,respectively. Overall,the auto-focusing system can improve signal stability and measurement accuracy.
关键词	光谱学激光诱导击穿光谱光谱信号稳定性自动聚焦清晰度评价函数
收录类别	CSCD
语种	中文
CSCD记录号	CSCD:6297441
引用统计
文献类型	期刊论文
条目标识符	http://ir.hfcas.ac.cn:8080/handle/334002/70186
专题	中国科学院合肥物质科学研究院
推荐引用方式 GB/T 7714	. 结合自动聚焦系统的共线双脉冲激光诱导击穿光谱信号稳定性研究[J]. 中国激光,2018,045.
APA	(2018).结合自动聚焦系统的共线双脉冲激光诱导击穿光谱信号稳定性研究.中国激光,045.
MLA	"结合自动聚焦系统的共线双脉冲激光诱导击穿光谱信号稳定性研究".中国激光 045(2018).